Bando SPC9500 Metric V-Belts WD All SD Non-Encapsulated

Bando SPC9500 Metric V-Belts WD All SD Non-EncapsulatedBando SPC9500 In addition to belts manufactured to ARPM (Association for Rubber Products Manufacturers) standards, Bando produces belts to European standard DIN 7753 and ISO4184. These standards are based on the metric system of measure and have different cross section designations. The Narrow Wedge profile allows for higher speed ratios, shorter center distances, and more compact drives. They are direct replacements for belts on imported machinery

JMEWDM4110T SPEC

Model_Number BW63 PRODUCT NAME 75 HP - ODP - 1780 PHASETYPE 3_PHASE MOTOR ENCLOSURE ODP HORSEPOWER 75 KILOWATTS 55

2 No load current 24

Frame 404/5TS Output 125 HP Number of Poles 4 Frequency 50 Hz Rated speed 1470 rpm Slip 2

0 in Nominal width 609

92 in Width 54 mm / 2

Featuring components that meet IEC design standards and UL horsepower ratings

lb Locked rotor torque 190 % Breakdown torque 229 % Locked rotor time 36s (cold) 20s (hot) Moment of inertia (J) 49

5 HP - - 1725 PHASETYPE 1_PHASE HORSEPOWER 1

Nominal Outside Length (mm)1180

125 IN Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Speed Code Single Speed Motor Standards NEMA Starting Method INVERTER SPECIAL Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings

0 Inches Static Pressure: CFM = 1320