Century EM3463 PRO-E SERIES® Fan and Blower Motor, 1/2 MAX HP, 1 Ph, 60 Hz, 115 V, 1075 RPM, 4 Speed, 48 Frame, OPEN All Capacitors

Century EM3463 PRO-E SERIES® Fan and Blower Motor, 1/2 MAX HP, 1 Ph, 60 Hz, 115 V, 1075 RPM, 4 Speed, 48 Frame, OPEN All CapacitorsPro E Series Direct Drive Fan & Blower Motor 5. 6" Diameter 48 Frame Permanent Split Capacitor (PSC); Capacitor Required: 10 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Open Air Over Class B Insulation, 40C Ambient Ball Bearing 1 2" Diameter Shaft with Flat 36. 5" Leads with Quick Connect Terminals Extended Studs Shaft End, Resilient Ring Mounting, Mounting Holes in Shell, Belly Band Mount (Belly Band Not Included) Additional

15 STARTCAPMFD N\A SHIPPING WEIGHT 4800 BREAKDOWN TORQUE 253 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 109 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER F LOCKED ROTOR AMPS 283 NEMA NOMINAL EFFICIENCY 95 FULL LOAD AMPS PRIMARY 84/49 SERVICE FACTOR AMPS PRIMARY 97/56 Technical Data

Standard NEMA MG-1 Frequency 60 Hz Voltage 230 V Number of poles 4 Degree of Protection IP55 Synchronous speed 1800 rpm Output rating 14 HP Mounting F-1 Flange Without Terminal box¹ Left position Enclosure IC411 - TEFC Electric Motors

22 % Rated voltage 460 V Rated current 28

1 LB-FT Starting Current 70

Catalog Number VEL11317 Enclosure OPEN Frame 56C Frame Material Steel Frequency 60

125 MOUNTING STUD MOTOR TYPE 000 OPPOSITE END BEARING SELF-ALIGN SHAFT END BEARING SELF-ALIGN AMBIENT 40 ROTATION CW LEAD END SERVICE FACTOR 1 RUNCAPMFD 5 RUNCAPVOLTS 370 SHIPPING WEIGHT 10 THERMAL PROTECTION AUTOMATIC RESET BREAKDOWN TORQUE 28

75 MOTOR TYPE FHP OPPOSITE END BEARING 6203 SHAFT END BEARING 6203 AMBIENT 40 ROTATION CCW LEAD END REV SERVICE FACTOR 1

3 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code M Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 18 AWG Motor Type 3310L Mounting Arrangement F1 Number of Poles 2 Overall Length 9

1 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 4 @ 18 AWG Motor Type 3428LC Mounting Arrangement F1 Number of Poles 4 Overall Length 12

773 Line Amps 46

Standard NEMA MG-1 Frequency 60 Hz Voltage 380/660 V Number of poles 4 Synchronous speed 1800 rpm Output rating 1 HP Mounting F-1 Flange Without Terminal box¹ Without Terminal Box Enclosure IC01 - ODP Electric Motors

Agency Approvals CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Constant Torque Speed Range 6-60 Current @ Voltage 52