Honesuki 155mm nakiri

Honesuki 155mm nakiriThis Tetsu Honesuki feature a small blade but thick, good distal taper, and thin tip. Flat profile with a slight curve toward the tip. The san mai is made from 52100 core steel with vintage wrought iron cladding. Forged to shape and to geometry the bevels are ground on water cooled grinding stone with a Kasumi finish. Specs : Blade length : 155mm Blade height at heel : 40mm Hagane : 52100 (100C6) Jigane : Wrought iron (Scotland) Handle : Wa

harden at 65HRC

polish and sharpen a limited edition Petty (140x30mm) knife for you to take home

Tall and thin cleaver with a camouflage cladding made from mild steel and pure iron layers

Forged to shape and to geometry the blade is ground on water cooled grinding wheel with an etched and stone finish

Thick spine the blade taper to a very thin tip

- Handle : Wa 120mm with English Yew

San-maï hand forged from 26C3 high carbon steel core and Damascus (Pure iron and mild steel) cladding

with burnt Holm Oak

Overall length : 380mm

- Balance point : at the Emoto- Weight : 104gr- Finish : Etch kurouchi with stone polished bevels

This Nishiji Gokujo feature a short curved blade

Weight : 88gr