Jim Root Strat - White/Black/White 3 ply Jazz Bass Custom

Jim Root Strat - White/Black/White 3 ply Jazz Bass CustomThis Jim Root signature pickguard is made specifically for the signature Fender Jim Root Stratocaster. This model features just one volume pot hole and the selector switch is in an alternative position compared to a regular Strat. The Humbucker cutouts are specifically cut to take the EMG 60 and 81 models that are fitted as standard on the Jim Root signature guitar. Many manufacturers may make a similar model but this does not mean every pickguard of

this pickup gives a bright lively response with strong mids and a bright top end whilst still allowing a lot of the bottom end bass frequencies through

KTS have always ensured that their attention to detail and sourcing the very best materials create the ultimate titanium saddles available today

including the typical wear around the pot holes simulating the marks created by the volume and tone knobs over many years of useage

cut with one Humbucker in the bridge position and a singlecoil in the neck

Introducing the NEW Kluson 19:1 ratio diecast tuning machine

Fender Tom Delonge Stratocaster

Mounting bracket width = 1 5/32 inches

Black pearl / white / black / white layers

Tele Bridge Vintage Baseplate Stainless

Depth of neck at heel (excluding fingerboard) - 19

with the gaps above the intonation screws and the retaining wire

The peghole bore size is vintage 11/32 in