4-1/2" 115mm angle grinder diamond disc / disk cutting brick / stone TE619 Trailer Adjusters & Expanders

4-1/2" 115mm angle grinder diamond disc / disk cutting brick / stone TE619 Trailer Adjusters & ExpandersProfessional tool for commercial or occasional use Suitable for cutting most general building materials including stone brick wood concrete masonry asphalt marble granite etc Not suitable for metallic materials Allow blade to cool every 30 60 seconds Suitable for dry or wet use. Diamond cutting disc suitable for all makes of grinders Comes with a 20mm bore reduction ring. DISC DIMENSIONS ARE AS FOLLOWS 115mm x 1. 9mm x 22. 2mm 4 1 2" x 3 32" x 7 8"

Combination so open end on one part of the spanner and a ring on the other end

• Metric Spring washer – No 8 x 120

gate or door

Thickness: 2

5mm Tall and 64mm Wide

-4 x brighter than LED

9mm square end that can be pushed into the sleeve to create the extension when required / necessary

- 15cm x 42mm

1/4" and 3/8” drive torx bits so will fit any 1/4"or 3/8” drive Torx bits

but can also fit under connectors on other glow plugs

T55 Sockets Made from S2 Steel

Standard gives up to 2000 Nm / 1475 ft/lbs of torque