Fasco D1144 OEM Replacement Motor, 1/25 HP, 1 Ph, 60 Hz, 115 V, 1200 RPM, 3 Speed, 3.3" Diameter, OAO EXPLOSION PROOF/DIP

Fasco D1144 OEM Replacement Motor, 1/25 HP, 1 Ph, 60 Hz, 115 V, 1200 RPM, 3 Speed, 3.3" Diameter, OAO EXPLOSION PROOF/DIPOEM Direct Replacement Motor 3. 3" Diameter Permanent Split Capacitor (PSC); Capacitor Required: 4 Mfd 370 Volts (Not Supplied with Motor) Thermally Protected Open Air Over Class B Insulation, 40C Ambient Sleeve Bearing 3 8" Diameter Shaft with Flat 8" Leads Resilient Ring Mounting Additional Information Thermal ProtectionThermally Protected Speed1200 rpm Current1. 10 A Number of Speeds3 Ambient Temperature40 C ULRecognized Insulation ClassB CSAY

0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR NEMA PREMIUM CCSAUSEEV Ambient Temperature 40 °C Auxillary Box No Auxillary Box Base Indicator Rigid Bearing Grease Type Polyrex EM (-20F +300F) Current @ Voltage 69

82 FULL LOAD AMPS PRIMARY 5

82 RATING 40C AMB-CONT DE 6203 ENCL OPEN Parts

5 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class H Inverter Code Inverter Ready IP Rating NONE KVA Code G Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 9 @ 14 AWG Motor Type 3734M Mounting Arrangement F1 Number of Poles 2 Overall Length 18

Load 97° C Start Configuration DOL Break-Down Torque 55

Amperes 7186 A LRC 8

Model_Number GF45 PRODUCT NAME 5 HP - TEFC-IP55 - 1760 PHASETYPE 3_PHASE MOTOR ENCLOSURE TEFC-IP55 HORSEPOWER 5 KILOWATTS 3

20 A LRC 7

11 % Rated voltage 460 V Rated current 138 A L

6 a Heater Indicator No Heater Insulation Class B Inverter Code Not Inverter IP Rating NONE KVA Code K Lifting Lugs No Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Termination Flying Leads Motor Type 3528L Mounting Arrangement F1 Number of Poles 6 Overall Length 15

21 IN Power Factor 79 Product Family Crusher / Chipper Pulley End Bearing Type Roller Pulley Face Code Standard Service Factor 1

47 NEMA NOMINAL EFFICIENCY 70 FULL LOAD AMPS PRIMARY 10