Sikagard 705 L Size:180kg

Sikagard 705 L Size:180kgSikagard 705 L is a one component low viscosity, solvent free, reactive impregnation for concrete and cementitious substrates based on silane with 99% active ingredient. Sikagard 705 L complies with the highest requirements of EN 1504 2 for hydrophobic Impregnation (penetration depth class II & resistance to freeze and thaw salt stresses). USES Sikagard 705 L is used as water repellent impregnation (hydrophobic treatment) for absorbent substrates such

Optimized Performance: Ensures efficient material removal and delivers high-quality finishes on concrete and stone surfaces

seamless application

2x Ultrakote High Solids Epoxy full 16L kit

The Polivac Stingray SL2000 delivers ultra-high-speed performance for large scale cleaning operations

When pumping SikaGrout-212 HP

This allows you to apply two coats of epoxy to your floor without having to worry about the required tools

Hardened / cured material can only be removed mechanically

Class III membrane >300% according to AS/NZ4858 Single component

Ready for tiling after 2nd coat 4 hours Ready for flood testing 24 hours Return to service 3 days Drying times are determined at 23°C and 50% Relative humidity

brush: In 2 directions (diagonally opposite / cross-wise)

Note: Failure to follow the above may result in uneven gloss and or colour in the finished product

or loose paint from the surface to ensure optimal results