Bando TL48-S8M-25 STS TL Timing Belt Pulley (2012) Programmers - Testers

Bando TL48-S8M-25 STS TL Timing Belt Pulley (2012) Programmers - TestersBando TL48 S8M 25 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance

Load 77° C Start Configuration DOL Break-Down Torque 7

06J487X189G1 HP 3 TE VOLTS 460 AMPS 4

Packard - C35060A

90 A Rated torque 27

67 % Rated voltage 400/690 V Rated current 225/130 A L

125 MOTOR TYPE FHP OPPOSITE END BEARING 6205 SHAFT END BEARING 6203 AMBIENT 40 ROTATION REVERSIBLE SERVICE FACTOR 1

Magnetek692

5 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code H Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 14 AWG Motor Type 0750M Mounting Arrangement F1 Number of Poles 2 Overall Length 23

1760 FRAME 56C SER

Nominal Outside Length (mm)2032

37N800R891H1 HZ 60 VOLTS 230/460 AMPS 24/12 EFF 88

Bando - 100-S2M-148UK Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile