Bando P14H200 MPB TB Pulley 3/4" Totally Enclosed Air OverBando P14H200 The type of pulley used on a Synchro Link drive depends on a number of factors, including but not limited to, space available, ratios, center distances, horsepower being transmitted, speeds and user preference of mounting systems (i. e. QD, TL or Minimum Plain Bore). With Synchro Link Drives, as with gear or chain drives, circular pitch (usually referred to as pitch) is a fundamental consideration. On the belt, pitch is the distance
25 STARTCAPMFD N\A SHIPPING WEIGHT 325 BREAKDOWN TORQUE 240 BREAKDOWN TORQUE UOM PERCENT OF FLT LOCKED ROTOR TORQUE 246 LOCKED ROTOR TORQUE UOM PERCENT OF FLT INSULATION CLASS F KVA CODE LETTER G LOCKED ROTOR AMPS 172 NEMA NOMINAL EFFICIENCY 93
Standard NEMA MG-1 Frame 213TC Frequency 60 Hz Number of poles 4 Degree of Protection IP56 Synchronous speed 1800 rpm Mounting F-1 Flange C Terminal box¹ Left position Enclosure TEFC Attributes
0 Wire size (AWG/kcmil) 4-350 Number of lugs 1
5 VOLTS 575 AMPS 8
weight³ 536 lb Efficiency
Catalog Number CPX21126T Enclosure XPFC Frame 215T Frame Material Iron Frequency 50
Break-Down Torque 26 LB-FT Pull-Up Torque 12
93 IN Power Factor 75 Product Family General Purpose Pulley End Bearing Type Ball Pulley Face Code Standard Pulley Shaft Indicator Standard Rodent Screen None RoHS Status ROHS NON-COMPLIANT Service Factor 1
4 SERVICE FACTOR AMPS PRIMARY 13
Bando - 200-S5M-1000 HP Anticipating the demand for energy savings and higher horsepower transmission
8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 3 @ 18 AWG Motor Type 3526M Mounting Arrangement F1 Number of Poles 4 Overall Length 13
CAT NO EM3714T-58 SPEC
