Alchitry Fn V2

Alchitry Fn V2Keep your board extra cool with the Alchitry Fn V2! This board features a 3x3x1cm blower style fan that forces fresh cool air over the FPGA. It also comes with an oversized 25x25x5mm heatsink to attach to the FPGA. There is a solder jumper that can be closed to allow control over the fan via pin B36. The fan consumes ~550mA on the 3. 3V rail (~1. 75W). Documents Schematic 3D Model (STEP)

XC7A35T-2FTG256I FPGA (speed and temperature grade upgrade over Au V1)

44 pins are routed as 100 ohm differential pairs (includes 18 triple voltage pins)

If you're looking for the original Br available now

QWIIC connector (shares pins on bank B)

The bottom pinout is the same between models

Simplified 3D Model (STEP)

These boards have been reworked so they are fully functioning

100MHz oscillator

5mm stack-height DF40 connectors

The Artix 7 FPGA requires a free license for Vivado

5mm allowing a for use of the high speed 1

206 IO pins All IO pairs are LVDS_25 capable inputs or TMDS_33 capable IO