Bando 5-5VK850 Power Ace Aramid Combo EX-DBBando 5 5VK850 Power Ace Aramid Combo resolves flipping or jumping problems To resolve problem applications where belts are flipping over or jumping out of the sheaves, utilize Bandos series of Combo belts. The tie band assures lateral rigidity and guides the belts into the sheave grooves. The tie band, reinforced with high strength transverse tensile cords, is fully oil and heat resistant and permanently welds the individual belts together. Combos
26" Leads with Female Spade Terminals
CWDM3537 SPEC
250 IN Shaft Extension Location Pulley End Shaft Ground Indicator No Shaft Grounding Shaft Rotation Reversible Shaft Slinger Indicator Shaft Slinger Speed 3530 rpm Speed Code Single Speed Motor Standards NEMA Starting Method Direct on line Thermal Device - Bearing None Thermal Device - Winding None Vibration Sensor Indicator No Vibration Sensor Winding Thermal 1 None Winding Thermal 2 None Drawings
6 RPM 2850 1/MIN FRAME 56C SER
lb Locked rotor torque 280 % Breakdown torque 0 % Locked rotor time 41s (cold) 23s (hot) Moment of inertia (J) 72
Bando - 1192-8M-20 Synchro-Link® HT (High Torque Synchronous) belts' curvilinear tooth design improves stress distribution to provide high horsepower ratings over a wide speed range and high torque transmission at low speeds
GoodmanB1401018S
Frame Material Cast Iron Impregnation Method Dip and Bake Polyester Regreasing System At Drive end and Non-drive end Main terminal box hole NPT 1 1/2" Terminal Block Without Shaft Locking Device Without Shaft Material SAE 1040/45 Carbon Steel Painting RAL 5009 203A (ISO 12944 - C2) Grounding Lugs Single Fan Cover material Without Fan Cover Tropicalized Painting Without Fan material Without fan Bearing cap Yes- Bearing Cap Bolt Material Carbon Steel Balancing Method 1/2 Key Drip Cover Without Overload protector (phenolic) Without overload protector Connection Cables Quantity 12 Downloads
78 LB-FT Starting Current 10
Bando - 8T5-410UG Synchro-Link® Trapezoidal Timing Belts - Polyurethane (Metric)
Bando - 100-S2M-290 Unique modified curvilinear tooth form enables the STS belt to transmit greater loads than like-sized drives having the standard high torque tooth profile
ECPM4407T-4 HP 150 FRAME SIZE 447T DRIVE END BEARING 90BC03J30X OPP D
