QS138 70H V3 Motor Mounts Electric dirt bike

QS138 70H V3 Motor Mounts Electric dirt bikeWe use these mounts for our 660 Raptor Kit. They are for mounting the QS138 v3 70 to a flat steel plate. Welding required. . 135 thick 1008 mild steel. Weld in place. A . 060 shim is included to go in between the motor and the mount on the sprocket side, on the two bottom tabs on the motor. This allows the mount to sit flat on the motor as the upper mount sticks out . 060 past the bottom mounts. These mounts will position the center of the output

This short bolt goes in the hole closest to the rear

The controller and DC converter are mounted in the air box location

Ignition key switch

These clamp the forks into the triple trees

Works with Fardriver

Forget the traditional ATV roar echoing through the wilderness

25 25mm long

Fits the QS 138 90h V3

ATV not included

Controller: Fardriver 72680 w/Bluetooth module

See RTX-1 Part #11 to order the second bearing

Fully adjustable nitrogen filled rear shock