Baldor KENM3454 .25HP, 1750RPM, 3PH, 60HZ, 56C, 3512M, TENV, F1 Chemical Processing (Not DC)

Baldor KENM3454 .25HP, 1750RPM, 3PH, 60HZ, 56C, 3512M, TENV, F1 Chemical Processing (Not DC)Specs Catalog Number KENM3454 Enclosure TENV Frame 56C Frame Material Steel Frequency 60. 00 Hz Motor Letter Type Three Phase Output @ Frequency . 250 HP @ 60 HZ Phase 3 Synchronous Speed @ Frequency 1800 RPM @ 60 HZ Voltage @ Frequency 460. 0 V @ 60 HZ 230. 0 V @ 60 HZ XP Class and Group None XP Division Not Applicable Agency Approvals NEMA_PREMIUM UR CSA EEV CSA Ambient Temperature 40 C Auxillary Box No Auxillary Box Auxillary Box Lead Termination

3 POLES 4 NUMBER SPEEDS 1 RPM 1725 HERTZ 60 VOLTS PRIMARY 115/230 V VOLTS 115 VOLTS 2 230 FRME 56 STATOR DIAMETER 5

402 0 Line Amps 0

25 % Rated voltage 460 V Rated current 69

6x(Code G) No load current 125 A Rated torque 1030 ft

5 a Heater Indicator No Heater Insulation Class F Inverter Code Inverter Duty IP Rating NONE Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Termination Flying Leads Motor Type 3528B Mounting Arrangement F1 Number of Poles 4 Overall Length 13

0x(Code G) No load current 31

2 kW (3 HP) Number of Poles 2 Frequency 50 Hz Rated speed 2875 rpm Slip 4

5 KILOWATTS 30

1 POLES 4 NUMBER SPEEDS 1 RPM 1755 RPM 2 1755 RPM 3 1740 RPM 4 1445 RPM 5 1445 HERTZ 60 HERTZ 2 50 VOLTS PRIMARY 230/460 VOLTS 460 VOLTS 2 230 VOLTS 3 208 VOLTS 4 400 VOLTS 5 200 FRME 145 SHAFT CODE T MOUNTING HORZ-FOOTED ASSEMBLY POSITION F1 MOTOR TYPE CTE OPPOSITE END BEARING 6203-2Z-J/C3 SHAFT END BEARING 6205-2Z-J/C3 AMBIENT 40 ROTATION DUAL SERVICE FACTOR 1

Catalog Number EMVM3546C Enclosure TEFC Frame D80C Frame Material Steel Frequency 60

40E211X775 HP 15 RPM 1180 VOLT 230/460 AMP 41/20

Frame 444/5TSC Output 125 HP Number of Poles 4 Frequency 60 Hz Rated speed 1785 rpm Slip 0