Bando J 2 7/16 QD BORE 2 7/16 (2.4375) HANDLES (ACW / DWB)

Bando J 2 7/16 QD BORE 2 7/16 (2.4375) HANDLES (ACW / DWB)Bando J 2 7 16 The original sheave and pulley mounting system developed to facilitate installation and replacement of components. The QD (Quick Detachable) design provides for both conventional (flange outboard) and reverse (flange inboard) mounting configurations.

5 kW) Number of Poles 4 Frequency 50 Hz Rated speed 1480 rpm Slip 1

CESWDM3714T SPEC

625 MOTOR TYPE FHP OPPOSITE END BEARING 6205 SHAFT END BEARING 6203 AMBIENT 40 ROTATION REVERSIBLE SERVICE FACTOR 1

0 A Rated torque 106 ft

Motor TypeECM

VEL11319 SPEC

8 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Inverter Ready KVA Code L Lifting Lugs Standard Lifting Lugs Locked Bearing Indicator No Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 6 @ 14 AWG Motor Type 3728M Mounting Arrangement F1 Number of Poles 4 Overall Length 16

01 RPM 1770 FRAME 213T SF 1

033 POLES 6 NUMBER SPEEDS 3 RPM 1100 HERTZ 60 VOLTS PRIMARY 277 V VOLTS 277 FRME 42 SHAFT CODE Y STATOR DIAMETER 4

1x(Code E) No load current 33

0 a Front Face Code Standard Front Shaft Indicator None Heater Indicator No Heater Insulation Class F Inverter Code Not Inverter KVA Code G Lifting Lugs No Lifting Lugs Locked Bearing Indicator Locked Bearing Motor Lead Exit Ko Box Motor Lead Termination Flying Leads Motor Lead Quantity/Wire Size 2 @ 8 AWG

lb Locked rotor torque 229 % Breakdown torque 260 % Locked rotor time 45s (cold) 25s (hot) Moment of inertia (J) 36