J's Racing Front camber joint w/o roll center S1 +2 degree - Honda S2000 srt8

J's Racing Front camber joint w/o roll center S1 +2 degree - Honda S2000 srt8It is the latest geometry part developed by J'S RACING who knows S2000 thoroughly. Due to the eccentric structure of the ball joint at the bottom of the knuckle, a negative camber on the front can be attached. It is possible to solve the camber shortage when driving on the circuit and to efficiently ground the tires when cornering. By raising the limit, you can improve the cornering speed and greatly contribute to the time up. As a new function, a

HR3806BU - 12x1

2000-2009 Honda S2000 Buddy Club Spec II Exhaust

Length: 35mm

Made from thick S45C reinforced steel plate with heavy duty forged casted pillow ball rod end can sustain everyday street and track abuse

The Mine's Carbon Trunk is made of extremely high quality dry carbon that reflects the true GT-R

Drop Rate(RR):  Estimated 1

These lugs come with a special key adapter to install and remove the lug nuts so you don't have to put a large socket close to the wheel and scratch it

com maybe it's your lucky day

Cold forged 1008 steel

The suction effect from low / medium speed to high rpm brings up to about 10PS increase

Size: 20 mm

A common replacement for Supras due to worn out OE bushings which create a lot of slap movement especially for lowered car