Nippondenso 40 Amp Alternator (Use Drop Down Box Below) Voltage:6 Volt

Nippondenso 40 Amp Alternator (Use Drop Down Box Below) Voltage:6 VoltThis is the same unit that is in the SGA faux Westinghouse unit above. These alternators are particularly good units, having logged tens of thousands of miles both under the hood in the faux Westinghouse cases and hung under the chassis on transmission driven generator cars. They have enough capacity to handle modern halogen lighting loads at low speeds, yet have a reasonably small capacity and high efficiency to allow them to be driven by the

Looks particularly nice framed by the old (large) RROC badge and the RREC badge

many pictures and drawings

never with any damage

you can get the materials locally and do it yourself if it is more convenient

maintenance (there is none) and parts manual

Order quick as supplies are limited

High quality tool steel made specially for the SGA

These covers are jacked in place by an external threaded rod that presses the cover against the felloe and that enters the small hole between the adjacent posts

It's widely used on aircraft engines for setting the mag timing

and 4) the wheels are restrained by energy absorbing chocks

Weight: 140 pounds

Note that the original blades can not be used with this hub